Send inquiry
High Quality 1080P FULL HD High Speed 36X zoom PTZ Dome 2 megapixel IP camera manufacturer
*7" Total Metal body construction, IP66 rate protection
*1/3" CMOS, 2.0 Megapixels, 36X optical zoom
*HD-IP digital interface output, 1080P high definition image
*OSD menu available
*PWM function, intelligent IR illumination & power consumption is variable, dependant the zoom factor
*IR distance 120M
Solution:
1/3" Panasonic Low Illumination 2MP CMOS Sensor, Hisilicon Hi3516A, DWDR, 3D NR
Main Stream: 1080P@30fps; With IR-CUT
36X Optical Zoom (f=4.6mm-165mm)
Specification:
Sensor | 1/3" progressive scan CMOS,Panasonic 34229 | ||
Effective Pixel | 2M | ||
Focus Distance | 4.6±5%~165±5%mm | ||
Optical Zoom | 36X | ||
Aperture Value | F1.6~F2.7 | ||
View of Angle | D : WIDE 68.5º±5% TELE 4.2º±5% H : WIDE 54.8º±5% TELE 3.4º±5% V : WIDE 41º±5% TELE 2.5º±5% |
||
Resolution | 1280H*720V/ 1920H*1080V | ||
Output Pixel | 1280Hx720V/24fps 1280Hx720V/25fps 1280Hx720V/30fps 1280Hx720V/50fps 1280Hx720V/60fps 1920Hx1080V/24fps 1920Hx1080V/25fps 1920Hx1080V/30fps |
||
Min. Illumination | 0.5 lx (F1.6, 50 IRE, ICR off), 0.095 lx (F1.6, 50 IRE, ICR on) | ||
AGC Control | Manual/Auto | ||
S/N Rate | >=50db | ||
White Balance | Manual/Auto | ||
Camera module control interface | SONY VISCA(Signal level 3.3V), baud rate: 9.6 Kb/s, 19.2 Kb/s, 38.4 Kb/s stop bit: 1 |
||
HITACHI COMMAND (Signal level 3.3V), baud rate: 4.8Kb/s, 9.6 Kb/s, 19.2 Kb/s, 38.4 Kb/s, 57.6Kb/s stop bit: 1 | |||
IR-cut | Manual/Auto | ||
Dome | |||
Communications Protocol | TCP/IP, HTTP, FTP, RTSP, UPnP, DNS, NTP, RTP, UDP, IGMP | ||
Software Control | IE, CMS, Management Platform | ||
Mobile View(optional) | Support Windows, iPhone, Android platform smartphone | ||
Horizontal Rotation Speed | 200°/s | ||
Horizontal Rotation Range | 360° | ||
Tilt Rotation Speed | 100º/s | ||
Tilt Rotation Range | 93° | ||
Auto Flip | Horizontal 180°, Vertical 180° | ||
Auto Control IR LED | PWM | ||
A-B Scan | User programmable | ||
A-B Scan Speed | 0-64 levels setting available | ||
Dwell Preset | 2-60s interval available | ||
Preset Points | 220 | ||
Go to Preset Speed | 01-64 levels available | ||
Guard Tours | 3 groups | ||
Guard Points | Max.16 points, dwell time user selectable | ||
PWR On Action | Memory/Tour 1/360° scan/A-B scan/Preset 1-8/None | ||
Park Time | 0-60mins available | ||
3D Location | Support (DH-SD1) | ||
Auto Control IR LED | PWM | ||
IR Illumination Distance | 120m | ||
IR LED | 22*22=6,Ф16=5 | ||
Baud Rate | 1200/2400/4800/9600bps | ||
Operating Temperature | -40°- +60° | ||
Operating Humidity | ≤95% Non Condensing | ||
Heater & Blower | Auto temperature control | ||
Power Supply | DC12V ≤4A | ||
Power Consumption | ≤ 20W | ||
Lightning Protection | Transient voltage 6000V |
3.Packaging:
Cantonk package or OEM/ODM as customers' request.
ODM/OEM Services:
a. Logo
Please offer us your own high resolution logo in JPG format;
There should be two colors at most in the logo;
There should be no gradient effect in the logo
b. Label
Please offer us your own model numbers
Other requirements
c. Manual
Please offer us the finished manual file that can be printed directly.
d. Packing Box
We will offer you the dimension and the design file;
Please design your own style based on this file then send it back to us;
We will print some samples for your checking;
e. The Whole Camera/DVR
Housing: Please offer us the housing design file then we will offer you a sample for your checking;
Requirement on other parts
4.Shipment:
We have strong cooperation with TNT, DHL and UPS, and once we get your order,we can find the lowestshipping cost for you. Or you can have your own forwarder.
a. By TNT, DHL, UPS or FedEx
b. By our forwarding agent (by air or by sea);
c. By your own forwarding agent
d. By domestic forwarding agents to any city in China.
5.Lead time:
a. Sample orders will be delivered from our factory within 5 working days.
b. General orders will be delivered from our factory within 12 working days.
c. Big orders will be delivered from our factory within 19 working days at most.
6.Warranty:
To CCTV Cameras/ DVRs
a. 2 years, products with your own logo or without logo
Conditions and Terms
a. The warranty starts from the delivery date from our factory;
b. During the warranty, any defective product will get repaired or replaced for free;
c. The warranty is unavailable for those products which are broken by the violence or the carelessness or repaired or altered without the authorization.
d. A RMA form will be asked to fill in.
7.Payment Terms(How to purchase products from us ):
We will email you a proforma invoice with our bank information, after your payment, we will arrange the production for your order.
Telegraphic Transfer (T/T)
a. Usually we accept 100% T/T in advance;
b. Subjected the order amount, we can accept 30% deposit T/T in advance + 70% balance T/T before the shipment.
Note: When you make the payment, please write down the PROFORMA INVOICE (PI) NUMBER on the bank receipt as the reference.
PayPal
4% commission charges will be added into the amount.
Letter of Credit (L/C)
a. L/C is available for the sea transit only. We don't accept L/C for the air transit.
b. On condition that order amount reaches someone then we will accept L/C;
c. We accept L/C at sight only;
8. Information for our VIP customers($100,000/per year):
For warranty:
a.the most we could do is to supply 1%~2% spare parts with all of your orders.
b.Besides, when you have fault products, we need you to send them back to us, and we will afford 50% freight charge.
c.As per our so long experience in producing and selling CCTV Cameras, and this warranty is reasonable. Please consider it.
For payments:
a.Basis on orders forcasts, we only need to get 10%~30% deposit, and the balance is before delivery.
b. Basis on long-term cooperation, we could accept L/C at sight, or make the payment after receipt of B/L copy (only for sea-shipment)
For the price:
We update our full price list one month one time and we often 1%~3% discount if you place a bigger order.
For lead time:
a.we have newly enlarged our housing factory. Before cause we have too big demands on camera housing, and the supply of them delay our lead time.
b.Now everything is going better, and we are going to short the lead time into 7-10 days.
9.Company information:
Cantonk Corporation Limited is a professional manufacturer for CCTV Cameras & DVRs,which is located inGuangzhou, China.
Business scope: HD-IP Cameras, HD-SDI Cameras,HD-Analog Cameras,stand-alone DVRs, NVRS and CCTV accessories.
Certificates: All the products have passed CE, FCC and RoHS certificates.
1. Scale
Cantonk, biggest CCTV manufacturer in China, top three export volumes with over 2000 workers.
2. Capacity
Cantonk, as a VIP of SONY, applied with SAMSUNG SMT;
10,000pcs daily output promises a early delivery time
3. Customers
Over 6,000 customers all over the world, Cantonk as a reliable partner, also want you to join us
as a manufacturer.
We know customers have strict rules for price and quality, and a better price a big manufacture here,andsupport you with technical.
Regarding price comparison, cantonk price is very competitive with Hikivision, Dahua, which Cantonk sharethe same level with.
10.Cantonk Trade Show all over the world:
Warmly welcome your visiting the coming trade shows below in 2017 ^ ^
Exhibition 1:
Name: Intersec 2017
Booth No.: SA-M25
Date: During Jan 22-24, 2017 in Dubai World Trade Center P.O. Box 9292 Dubai, UAE
Exhibition 2:
Name: MIPS 2017
Booth No.: Unconfirmed
Date: During March 21-24,2017 in Expocentre Fairgrounds, Pavilions 8. 14 Krasnopresnenskaya nab., Moscow, 123100, Russia
Exhibition 3:
Name: EXPO SEGURIDAD MEXICO 2017
Booth No.: 1347
Date: During March 14-16, 2017 in Centro Banamex Ciudad De Mexico, Mexico City
Exhibition 4:
Name: ISC West (Las Vegas) 2017
Booth No.: 40133 & 40232
Date: April.5-7, 2017 in Sands Expo & Convention Center Las Vegas, NV, USA
Exhibition 5:
Name: China Sourcing Fair
Booth No.: Unconfirmed
Date: April 11-14, 2017 in Asia World-Expo, Hong Kong
Exhibition 6:
Name: Exposec 2017 Brazil
Booth No.: 317C+317A
Date: May.23-25,2017 in Expo Center Norte-Red Pavilion, Sao Paulo, Brazil
Exhibtions 7:
Name: SECUREX SOUTH AFRICA 2017
Booth No.: Unconfirmed
Date: May 30-June 01, 2017 in Hall 2, GALLAGHER EXPO CENTER
19 Richards Drive Midrand, Johannesburg, Gauteng, South Africa
Exhibition 8:
Name: IFSEC 2017 in UK
Booth No.: E355
Date: June 20-22, 2017 in EXCEL LONDON, UK
Exhibition 9:
Name: China Sourcing Fair
Booth No.: Unconfirmed
Date: October 11-14, 2017 in Asia World-Expo, Hong Kong
Exhibition 10:
Name: CPSE 2017
Booth No.: 1D16
Date: Oct. 29-Nov.01, 2017 in Shenzhen Convention & Exhibition Center, China
Order Online:
If you have any questions, please contact me by:
Ms Rachel
86-15817073235
Looking forward to our long-term cooperation, thanks.
"Reliable Digital Security Products Manufacturer"